-
Chevrolet Master
6,826 Answers
- Posted on Aug 04, 2010
Re: Fix brake switch on a 1997 chevy tahoe
Stop Lamp Switch
Removal & Installation
To Remove:
- Disconnect battery negative cable.
- Disarm the air bag system.
- Using snap ring pliers, remove pushrod retainer from brake pedal pin.
- Remove stop lamp switch from pushrod.
- Disconnect stop lamp switch electrical connector.
To Install:
- Connect stop lamp switch electrical connector.
- Snap stop lamp switch onto pushrod.
- Using an 11 mm socket, push pushrod retainer clip onto brake pedal pin.
- Connect battery negative cable.
- Arm the air bag system.
×