Question about Honda Ridgeline
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: check engine light
You need change the Automatic Transaxle sensor or get Automatic Transaxle serviced ,please contact the dealer get it fixed or any other service center...........
Posted on Jun 10, 2008
SOURCE: check engine light
This is not really a big problem, it only alerts you that there might be an issue. Take the car for a scan which will reveal any issue at hand.
Please rate this fixya.
Posted on Apr 10, 2009
Code P0108 means your MAP sensor circuit is open. MAP means Manifold Absolute Pressure. You should be able to buy one at your local parts store - otherwise, the dealer.
Posted on May 30, 2009
po505 idle air control if this is the code all hondas do it eventully, small problem easy fix u have 2 choices either remove the idle air control motor and clean the inside of it u will find it's black and the spring inside is stuck clean it with carb cleaner or gum cutter any parts store will have this it's a dirty job it will work for awhile but to replace it is recommended its not expensive for a new one which u can get at any autoparts store autozone,advanced,napa etc. there is only 2 bolts in most cases maybe 3 i doubt it though if u go online t google and type in th eyear make and model and engine size in ur case it's a 3.0 v6 and look for idle air control locations u'll find it to do this job a shop will charge u anywhere from 100.00 for diag to retrive the code plus the part and the labor so about 250.00-375.00 it will only take u honestly maybe 15 minutes to perform only tools needed are a 10 millimeter wrench there is only 1 connector to disconnect and ur done if u do this u will still have the check engine light because u have not cleared it from the computer to do this just disconnect the negative battery terminal (the black one or has a neg sign - don't disconnect the positive side +)for 5 minutes then reconnect and the computer will have reset no more light. good luck it really is that easy
Posted on Oct 10, 2009
It would be better if you got the codes read and then post back with the code.There are numerous codes that can cause the check engine light to go on.Auto Zone will do this for free.There are a few other parts stores that do this for free also.Hope this helps.Good luck.
Posted on Mar 15, 2010
Tips for a great answer:
Aug 15, 2017 | Acura Cars & Trucks
Apr 24, 2016 | Cars & Trucks
Jan 16, 2016 | Cars & Trucks
Aug 19, 2015 | 2008 Honda Pilot VP
Aug 07, 2011 | 2002 Honda Accord
Sep 02, 2010 | 2002 Acura MDX
Oct 20, 2017 | 2002 Honda Odyssey
145 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: