Re: Where is the temperature sensor located in a...
On a inline six the sensor is screwed into the engine block ,you have to remove the alternator to get to it.on a v-8 the ect sensor is at the front left cylinder head above the number one spark plug..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
4200 vortec, Its located in front of engine, its just below the engine oil fill cap, right by the coolant hose is the camshaft position sensor (CMP) If your looking for the camshaft positioning actuator solenoid its location is on the exhaust manifold side on the top right corner of the cylinder head, if your looking at the motor from the exhaust side, its behind the power steering fill. You have to remove the belt to loosin the power steering pump through the pulley then kind of push it aside as you take out the camshaft actuator solenoid.
1 hour ago - Question about 2002 Oldsmobile Bravada. Open Question ... The chime sound that should signal that I am unlocking my 2002 Oldsmobile Bravada, andshould also signal when I lock it is not working. Posted by francisco_al on Feb ... T & C 2001 REMOTE CONTROL PROGRAMMING. Sep 17, 2012 ' 2001 ...
1995 oldsmobile achieva dash and tail lights don't work! ... My car, 98 intrigue, has the automatic climate control and will not change ... Usually the whining noise stops just before it stalls. ... I have a 2002 Olds Bravada I bought during cold weather. ... both the cam and crank sensor send their signals to the ignition control ...
Instructions
1
Shut off the engine of your Bravada, remove the keys from the ignition, and open the hood.
2
Locate the plug that powers the outdoor sensor. You will find it in between the front bumper and frame of the car, just to the right of the rightmost support bracket. The sensor plug is green.
3
Unplug the outdoor temperature sensor by separating the plug from its socket.
4
Plug the sensor back in, close the hood, and start the car. If the sensor's performance has not changed, it will need to be replaced.
Read more : http://www.ehow.com/how_7982496_reset-bravada-outdoor-temperature-sensor.html
the problem is your outside air temp sensor located on the front left corner of the radiator at the top. the sensor can be bought at your local parts store (napa, car quest, auto zone) for approx 8-10 bucks. 5 min replacement.
replace outside temp, sensor and check your refrigerant for recommended pressure, your outside air temperature sensor is located infront of your car, upper/ insidegrille
You will find the ambient temperature sensor behind the grille and in front of the condensor. The grille will have to be removed to replace the sensor.
It does sound like a sensor problem. Not sure where the sensor its self is, but they are usually by the drivers side mirror, or underneath the windsheild valance. They need to be placed in a area where wind wont give false readings due to wind chill factors. Any dealership should be able to tell you. good luck. John...
×