SOURCE: 2003 Dodge Caravan Front end clunk.
Had similar problem with 2003 Dodge GC. Replaced the parts you mention + rack & pinion, then to fix the now noticable whining noise, replaced power steering pump and pulley. Fortunately was under an extended warrentee at 46k miles.
SOURCE: inner tie rod end on 1999 chrysler 300m
oh yes, this is a problem with most all chrysler cars, front wheel drive, they will not admit to it or fix the problem though. just give us 2 or $300 and we'll repair it. bs. you need a bushing replacement kit, autozone under 10 bucks. and a little patients. drop me an email and i will upload photos of steps and try to talk you through it. not that hard no special tools only took 45min. no charge of course. you have to stick it to the system some times.
[email protected]
SOURCE: 2003 Dodge Durango clunking noise in front end can
With the information given this is not a sure solution. Questions that need to be asked is when does this happen, turning at slow speedm high speed, when hitting a pot hole etc? Since you have replaced a lot of things already, assuming you have NEW good quality parts so you did not replace bad parts with new bad parts i would definitelu check the pitman arm. This runs from the stering gear to the tierod. It can give you some good clunks while steering, especially at low speed when there is a lot of resistance. Check it by having someone turning the steering wheel when watchin/feeling it.
SOURCE: replace inner tie rod ends on 2005 gmc 1500
Yes, there is an inner tie rod end wrench, there are a few different types of wrenches available. You should be able to borrow one from one of your local parts stores. (Oreillys, Auto Zone, Napa, etc..)
280 views
Usually answered in minutes!
×