At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The egr valve should be located in the front of the intake manifold by the thermostat housing and alternator. It should be an electronic egr with one electrical connector.
do you check the egr valve or the selenoid ........ look with the engine runing pull the trotle cable to rev the engine check the diagram from the egr valve is going to move at all times and the engine is going to missfire ........ then desconect the little hose from the egr selenoid rev the engine 2000 rpm you will see the diference
I have had continuous missing issues on my 1997 Silverado after i had a new engine installed 30,000 miles ago. Today I purchased a new gasket for the EGR Valve and removed it. The mechanic had re-used the old gasket when he replaced the engine and cut corners to save $2.00. I found he had installed the EGR bass-ackwards causing my check engine light to stay on and the engine always to miss. Engine runs GREAT now
. The EGR valve is located in front of the oil filler neck. All you
need to do is remove the electrical wire from the top of the valve,
there is a clip on the connector so don't try and pull it off without
lifting the clip. Once the wire has been disconnected, just unbolt the
two bolts holding the EGR valve on. Thats it.
×