Hear a clicking noise when backing up and forward

if u hear that noise ONCE and then u have to go forward and backwards again so to hear it again is the noise of the braking pad that changes position since its a bit loose like all cars .

Normal.

http://www.harmankardon.com/support-product.html
click on the above link for that info about that

Ok let's start here since I cannot see or hear your description a few things I need to know ok 1 is there an aftermarket remote start or alarm on this car 2 I know there's a fuel pump relay in the trunk I believe by the side that u fill up on pull back the carpet cardboard and see if it has tripped all u do to push the red button down if it's popped up let me know and we will get u going down the road agian thanks for your question look forward to handling this problem with you regards Chris ...

Have you checked your intake cam. Mine started clicking when my cam got wiped.

is the tire flat? Have you physically taken the wheel off the right rear and inspected the tire for screws, metal pieces, rocks or other things stuck in the tire? Go do that right now..and see if something is there.

• Are you backing strait up when this noise happens? Or are you turning the wheel also? Also is a definite knock of perhaps a more click click click click.? Does this even happen when going forward? When the car is in drive and you put your foot on the brake and go into reverse, do you hear a profound clunk? Please answer the questions posed to help me help you a little better.
• If you have any comments please feel free to leave them here.
  
• Hope this helps and thank you for using FixYa.
  

Regards,Tony

its poossible that the seat switch stay ON permanently (internal problem) and will need to replace it; what is the Chrysler year and model?

The power switch for your seat is a six way switch . It only has one power lead going into it . So , if forward and backward work then you have power to the switch . Would you need to do is try the up and down control while listening closely . If you hear a clicking noise but nothing else when you energize the switch you probably have a bad vertical control motor . If you hear a motor running right after the clicking noise and you probably have a bad control cable which goes between the motor and the vertical gear . If you don't hear anything at all when you activate the switch up and down , I would suspect a bad switch .

there is a TSB(technical service bulletin) available at your dealership for that. Im pretty sure thats the cv shafts making that noise. its very common.

you have to re set the system
one by one seat & windows
1st start with the driver seat move it all the way forward and all the way up and the back as will all the way forward than to the back all of them one by one
do the same to other seat it will work
and the windows as will
close the door take the window up and hold till you hear a sound and down and hold till you hear the sound .