How to activate parking sensors on my mercedes cls 500 2006

SOURCE: How do you reset maintenance indicator on a 2006

u can check cls manual or take it to a dealer.

SOURCE: I have a 2006 CLS 500...44,500 miles...due for

Even Mercedes Service Departments cannot agree what is involved on a D service.
It is usually the 2 year periodic maintenance which includes transmission service, oil service and visual check of running components.

Most all Mercedes Dealers will write this up as a B service. It's up to you they don't over service the vehicle. Some MB dealers will sell you shocks and/or rear axle oil brake fluid flush, coolant flush and wiper replacement and who knows what else.

I suggest you find a GOOD independent Mercedes specialist and ask for a B service and report on any items needing attention.

Ask them to reset your Service FSS or oil interval reminder in the cluster, or do it yourself....it's in your Handbook around page #290. iirc.

Cost can be anywhere between $200.00 and $600.00.

SOURCE: how to reset the srs

Before resetting the SRS I would advise to take note of the error. You would need an OBD scan tool for you to get the errors and to reset the SRS.
On the fuse box found on the driver side of the car you should see the port for the OBD tool. Connect the OBD tool. Turn the key to the 'Run' position (the one before 'start'). List down the codes and make necessary repairs with the shop. This also resets the SRS if you wait for the light to go off before disconnecting the OBD scan tool.

SOURCE: what is the meaning OBD to reset SRS for CLS 500

You need a on board diagnostic scanner plugged in to locate fault
SRS is safety restraint system, fault is usually seat belt sensor
A good local auto electrician will locate the problem
Main dealer will cost a lot of money
Good luck Barry

Testimonial: "thanx"