Continental And Mark VIII With The 4.6L Engine
WARNING
Do not allow the drive belt tensioner to
snap back as damage to the drive belt tensioner or personal injury could result.
the 3?8
inch square hole in the drive belt tensioner.
To install:
the pulleys, except the idler pulley.
Ensure that all the V-grooves make proper contact with the pulleys.
Town Car With The 4.6L Engine
To install:
rotate the tensioner as described above and install the belt on the alternator
pulley. Refer to the belt routing illustration on the sticker located at the
front of the engine compartment. Ensure that all the V-grooves and all the ribs
on the belt properly contact the grooves on the pulleys.
Fig. 1: Make sure the belt makes proper contact with the pulley
grooves
Fig. 2: Accessory drive belt routing - 4.6L engine
Town Car And Mark VII With The 5.0L Engine
Fig. Accessory drive belt routing-4.6L (VIN W) engine
Fig. Serpentine accessory drive belt routing-4.6L (VIN V) engine
Hope helps (remember to rate and comment this free answer).
829 views
Usually answered in minutes!
×