At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
The door locks will not operate from the main switch at the driver's door. all locks must be operated manually. the abs light remains all the time. do you think the door locks are being fed by the abs unit?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
SMART ENTRANCE CONTROL UNIT PFP:28596 Description EKS003A2 OUTLINE The smart entrance control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger and door mirror defogger ? Power door locks ? Remote keyless entry system ? Vehicle security system ? Interior lamp ? Battery saver control BATTERY SAVER CONTROL Interior Lamp/Map Lamp/Vanity Lamps The lamps turn off automatically when the interior lamp, map lamp or/and vanity lamps are illuminated with the ignition key in the OFF position, if the lamp remains lit by the door switch open signal or if the lamp switch is in the ON position for approximately 10 minutes. After lamps are turned off by the battery saver system, the lamps illuminate again when: ? Driver's door is locked or unlocked, ? Door is opened or closed, ? Key is inserted into or removed from the ignition key cylinder. Rear Window Defogger/Door Mirror Defogger Rear window defogger and door mirror defogger are turned off approximately 15 minutes after the rear window defogger switch is turned on.
Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in smart entrance control unit)
Does it have power locks ?
TIME CONTROL UNIT PFP:28491 Description (Without Power Door Locks) EKS003A6 OUTLINE The time control unit totally controls the following body electrical system operations. ? Warning chime ? Rear window defogger INPUT/OUTPUT System Input Output Warning chime Key switch (Insert) Ignition switch (ON) Lighting switch (1st or 2nd) Seat belt buckle switch LH Front door switch LH Warning chime (located in time control unit) Rear window defogger Ignition switch (ON) Rear window defogger switch Rear window defogger relay
Anti-Lock Warning Light (ABS) - If Equipped This light monitors the Anti-Lock Brake System (ABS) described elsewhere in this manual. This light will come on when the ignition key is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on during driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required, however, the conventional brake system will continue to operate normally provided that the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefit of Anti-Lock Brakes. 24 7 Locksmith Orchard Park NY 716 710 7400 Locksmith Orchard Park NY
Hi Louis, The courtesy light switch is wired as follows. Power goes to the light. The light is then grounded through either the switch on the light or via each of the door switches. The reason for the interior light to remain on is that one of the door switches is worn and grounding all the time. look for a broken switch or one which is rough when operating. Regards John
TRY THIS IF DONT WORK DEALERSHIP HAS TO REPROGRAM TRANSMITTER.REMOVE KEY FROM THE IGNITION SWITCH.CLOSE ALL DOORS.SWITCH IGNITION ON.WITH IN 10 SECONDS, SWITCH IGNITION OFF AND REMOVE KEY.WITHIN 20 SECONDS, PRESS AND RELEASE DRIVERS DOOR COURTESY LIGHT SWITCH 3 TIMES, SWITCH IGNITION ON, WITHIN 10 SECONDS ,SWITCH IGNITION OFFAND REMOVE KEY.LOCKS WILL CYCLE TO CONFIRM PROGRAMMING MODE ACTIVATED. PRESS THE UNLOCK DOOR BUTTON TO CONFIRM THE DOORS OPERATE FROM LOCK TO UNLOCK. REPEAT PROCEDURE REMAINING REMOTE TRANSMITTER.IF THIS DONT WORK DEALERSHIP WILL HAVE TO REPROGRAM NEW REMOTE.
renew the drivers door lock or check if the operating solonoid is seperate from lock if so then often a good drop of engine oil down the operating arm often works
Had a similar problem with my Saturn. Door chime going all the time, the seat belts going up - down - up for no apparent reason.
Turned out to be the switch in the door jamb had become unseated. As it randomly made and broke contact, the cars computer thought the doors were opening and closing, then acted accordingly.
I remounted it with the help of a hot glue gun (plastic mount).
depending on the system if it is 2 channel or 4 channel one of the sensors that are located on the backing plate located behind calipers is eithier faulty or dirty you can try brake cleaner these sensors use a small magnet pickup device to sense when the wheel "locks up"
×