- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Power windows:
back left and right fail.? both? (from drivers and at correct door)
fronts dont'? fail?
try to say what all windows electric up and down don't do or do.
the full picture
do all other things on car work
drives ok, day and night.
you try applying power to the motor with test light to see if they go up and down, if it does. and do you have ground to the power switch, if the answer is yeas to both question, replace switch.
its usely the switches on the drivers door get a switch bundle from the auto wreckers .i dont deal with this enough to know why when the drivers switch wears out it affects both front windows .very common on chevy canyons. < japanease switches. new switches are insanely priced thats why suggest a auto wrecker switch bundle.
Do the individual door switches work their windows? If so, it would be the driver's side door switch, the master switch, that is bad. The fact that one window works off the driver switch means that power for the windows is at least getting to the master switch, and that the ground for all power windows is good. If the other door switches work, it is just the master switch, not a wiring problem.
could be the driver side master window switch... if the driver side window switch assembly is broken then the windows will not work... try using a test light to see if you got power to the with and and ohm meter to check all four switches on the drivers side
the power windows of most toyotas only works if the master switch located on the drivers side is good. remove the master switch check for burned traces on the printed circuit board. solder a jumper wire across the burned part and it should work
I had the same problem with now power to windows, mirrors and seat. The common soulution is the orange and or black wire in the boot have broken between the door and post.
×