2000 Chevrolet Suburban fuse for license plate lights

Not told! However, this gives a clue right here on Fixya

SOLVED: Location of fuse box for license plate light on a - Fixya

https://www.fixya.com > Forum > Cars & Trucks
Oct. 23, 2011 - location of fuse box for license plate light on a 1998 chevy cargo van - Cars & Trucks question.
1 answer · 3 votes: The license plate bulb is fed off the same fuse as the parking lights/tail lights.

Chevrolet Express (2003-2020) fuses and relays

https://fuse-box.info > chevrolet > chevrolet-express-20...
Fuse box diagram (location and assignment of electrical fuses and relays) for Chevrolet (Chevy) Express (2003, 2003, 2005, 2006, 2007, 2008, 2009, 2010, ...

There isn't a fuse for just the license plate lights , do your park lights work ? The park lamp relay powers the license plate lights as well as the parking lamps .

2000-2005 Chevrolet Impala Interior Fuse Check - 2003 ...

www.carcarekiosk.com/video/2003_Chevrolet_Impala_3.../fuse.../check

The video above shows how to check for blown fuses in the interior fuse box of your2003 Chevrolet Impala and where the fuse panel diagram is located.

Replace a Fuse: 2000-2005 Chevrolet Impala - 2003 ...

www.carcarekiosk.com/video/2003_Chevrolet_Impala_3.../fuse.../replac...

The video above shows how to check and change blown fuses in the engine bay of your2003 Chevrolet Impala in addition to where the fuse box diagram is ..

same fuse for the tail lights

Do the park lamps work ? license plate lights get power from same fuse ! Check ground wire ! use a volt meter an do voltage drop test ! Voltage Drop Testing The fuse for the license plate lights is in the under hood fuse box -engine compartment ! fuse #12 RT PRK LAMP 10Amp .

Check the brake bulb socket for short , clean replace bulbs , check connector to rear licence plate lights . Also trailer harness for short , all on same fuse circuit .

ck all fuse in under hood fuse box. RR PRK fuse 10 amps.

They are on the same fuse as the parking lights. If they work, start looking for bad wiring, or corroded sockets

check ground wire and clean bulb socket and contact points well with a high # grit sand paper

change the bulb in the tail light. And check your fuses for the license plate.