Fault code 9103. Transmission seems to be slipping, and will not grab onto any gears. Happened suddenly Please advise. ThanksFault code 9103.
Transmission seems to be slipping, and will not grab onto any gears. Happened suddenly
Please advise. Thanks
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
As spark plugs produced a temporary cure, assuming there isn't an engine problem causing the plugs to foul, the coil pack or at least one coil (as applicable) is probably faulty.
code p 2006 refers to intake manifold air control actuator , bank 1 --actuator stuck closed or for 2007 , the intake air manifold control actuator bank 1--solenoid stuck closed === causes ---wiring --- intake manifold air control actuator / solenoid ---mechanical fault
so for both it is either the actuator or the solenoid that is showing the codes
It could be an easy fix ,what make ,model an year vehicle . I know I saw a video on you tube on this very thing , the vehicle was a ford an it had a vacuum hose leak . Plus there was another one that had plastic pieces that broke an the control rod fell out of control arm. Check out some of these you tube videos . Installing New IMRC Bushing Ford Duratec Engine
Its a general warning, there will be a fault code that will help to narrow down the fault, you will need a reader to access the code. In my own experience gearbox filters and baffles cleaned and fresh oil may cure slip in an auto box, any slip in a manual wouldnt bring up a fault code.
The code reader I have gives me the description to the code being displayed and as you said Midas checked it, they should have given you a description also.
code p 1120 refers to throttle position sensor (TPS)
that unit responds to the accelerator pedal movement (APP)
===causes --faulty TPS--wiring -- poor connections-- TPS out of adjustment
symptoms include engine light on---no throttle response
reference site is www.engine -.comcodes
could be a restricted fuel filter and a service may cure problem, make the aware of the problem and ask them to test drive after service to see if fault is cured, if fault is still present ask to have scan done for fault codes
You need to take to Jaguar technician to have Mil lamp codes read and cured the restricted performance is the engine protecting itself as there is a fault in the management system,usually fuel system related,It has gone into "Limp Home" mode to try to limit the damage done untill the fault is cured
Fault code 9103.
Transmission seems to be slipping, and will not grab onto any gears. Happened suddenly
Please advise. Thanks
×