Where is the spare on the 1997 Blazer - 1997 Chevrolet Blazer

To remove the

underbody-mounted spare,

insert the chisel endo f the

wheel wrench, on an angle,

into the hole in the rear

bumper. Be sure the chisel

end of the wheel wrench

connects into the hoist shaft.

Turn the wheel wrench counterclockwise to lower the

spare tire. Keep turning the wheel wrench until the spare

tire can be pulled out from under the vehicle.

When the tire has been completely lowered, tilt the

retainer at the end of the cable and pull it through the

wheel opening. Pull the tire out from under the vehicle.

I NOTICE:

To help avoid vehicle damage, do not drive the

vehicle before the cable is restored.

If you have an inside-mounted spare tire, the tire must

be removed in order to have access to the jack storage.

To remove an inside-mounted spare tire, reach into your

tire's cover and unscrew the wing nut at the center of the

wheel. Remove it and the retainer. Unhook the tire from

the mounting bracket and remove the cover.

To remove a rear-mounted spare tire, first make sure

that the carrier arm is fully latched to the endgate. Then
remove the spare tire cover

Welcome to FIxYa.com

rear of truck under neath frame

Regards, Lee Davidian

Thank you for using FixYa,com.