I noticed a couple of months ago that the fan for the Heater/Vent/ AC is not engaging or turning on. I have gone through all the fuses and everything is fine. The question is...What the heck is not working? When I hit the AC Button I can hear the AC trying to work but their is not air coming out the vents. It is getting hot. What does something like that cost? Is their a quick fix?
I had the same problem. Try replacing the blower resistor behind the glove compartment. ($59.00 for part at dealership & 20 minute easy job. Two screws at bottom of glove box and two screws on resistor and replace. The blower ($150.00) motor may be causing the resistors to blow. I have already blown two speeds on my new resistor and believe it is because the bottom bearing on the blower motor is a little tight causing it to stick or slow start at lower speeds. No problem yet on high. Probably needs replacing.
It can be simple and cheap to repair if the problem appear to be less gas but it also
can be a problem with the air compressor which make in it a little bit
expansive.
528 views
Usually answered in minutes!
×