How do you change the parking lights - 1991 Mercury Tracer

Signal and Marker Lights
REMOVAL & INSTALLATION
Front Turn Signal and Parking Lights
1991-96 MODELS

1. Remove the lens upper retaining screw and the fender side retaining screw.
   
2. Slide the lens assembly forward until access to the rear is possible.
   
3. If necessary, unplug the bulb electrical connection.
   
4. Turn the bulb socket assembly counterclockwise and remove it from the lens.
5. Depress and twist the bulb approximately 1?8 turn
   counterclockwise, then remove it from the socket.
   
   
   
   
   
   Fig. 1: Remove the lens upper retaining screw and the fender
   side retaining screw
   
   
   
   
   
   
   
   Fig. 2: If necessary, unplug the bulb's electrical connection
   
   
   
   
   
   
   
   Fig. 3: Turn the bulb socket assembly counterclockwisehow do you change the parking lights - 90986p91.jpge it from the lens
   
   
   
   how do you change the parking lights - 90986p92.jpgr />
   Fig. 4: Remove the bulb from the socket
   
   
   To install:
   
   
6. Align the bulb's locating pins, then install the bulb in the socket.
   
7. Attach the socket to the lens and turn it clockwise to engage it.
   
8. If removed, attach the bulb electrical connection.
   
9. Place the lens into position, then tighten the fender side and upper
   retaining screws.