SOURCE: replace thermostat 2003 pontiac montana
yes but with the right shaped wrenches and tiny hands it can be done without removing the exhaust crossover pipe
SOURCE: how to put out the radio in montana 2003
there are 4 screws. two in the front behind the cup holder and two up underneath in the cupholder bay after the cupholder is removed. they are phillips head and 8mm I believe. this is all you need to remove the cover.
SOURCE: Rear wiper stopped working on 2004 Pontiac Montana Minivan AWD
Have you checked all fuses? Refer to owners manual for location.
SOURCE: 2006 Pontiac Montana rear brake lights and signal
check the ground in the fuse link also take out the rear tail light lens and make sure you don't have a broken or damage wire on the socket itself
SOURCE: 2003 Pontiac Montana Front Wheel Bearings
Remove the wheel, remove the hub nut, remove the brake caliper and rotor, put your socket and extension through the hub flange onto the bearing retainer bolts, undo them, release the abs sensor connector if it has it, remove the bearing and hub flange as an assembly, put the new one on and go backwards from here. Torque the hub nut to 180 ft/lbs, your done.
118 views
Usually answered in minutes!
×