Switching automatic engine to a manual truck.

Traditionally, it is located on the transmission body. Metal clad with two pin or wires. it works like a pushbutton switch.
However, new cars do not have that anymore especially auto or CVT trannys. Instead the switch is incorporated in the "gear position switch" assembly. Some are located on the transmission, some are located and the gear lever. This switch also help to show the driver and the transmission control unit what position the gear lever is at.

https://manuals.co/workshop/dodge/ram/dodge-ram-1995-workshop-manual-1500-v6-3.9l/5526894. Heres a link it might help.

I guess the short answer is no.
It depends on the engine and trans, but the starter for a 1995 model 5.2 is different from a 2002 model with a 4.7 engine.

Not certain... just a thought... I believe Dodge uses vacuum solenoids to switch air flow from floor to vents and to defrost. Perhaps your loose line is from that solenoid. My '93 would go from defrost to floor when climbing a hill because of loss of vacuum. I hope this helps steer you to a solution.

1995 Dodge RAM 1500 Service & Repair Manual

1995 Dodge RAM 1500 Service Repair Manual Software Download Manuals...

LICENSED OEM SERVICE AND REPAIR MANUAL SOFTWARE FOR THE 1995 DODGE RAM 1500!

If you need a repair manual for your Dodge, you've come to the right place. Now you can get your repair manual online in convenient digital format. Old paper repair manuals just don't compare! This online repair manual software covers the Dodge RAM 1500 and is perfect for any do-it-yourselfer.

In the dark old days of auto repair, you had to buy a traditional service manual in book format which would retail at a higher cost. Getting the same information in digital format is so much less expensive and more convenient!

Maybe you need the manual to fix the brakes on your RAM 1500, or possibly replace some worn out suspension components. Or you might need to get your engine running, or just do the required standard maintenance. Whatever the case may be, this repair manual software for the Dodge RAM 1500 is just what you need.

You will have all the service information you could ever need for your vehicle. It will help you fix the brakes, engine, suspension, steering, drivetrain, electrical problems, heat, air conditioning, etc. Anything can be fixed!

You can save a lot of money by working on your own vehicle. You probably already know this, but mechanics charge a lot. Do it yourself and use this 1995 Dodge RAM 1500 repair manual software to guide the way.

It gives you the manual for your RAM 1500 and it's very easy to use. It is compatible with any Windows computer including desktop PCs, laptops, smartphones and tablets.

code - 37 TCC brake switch circuit error. this is the torque converter clutch. Open or shorted condition detected in the torque converter part throttle unlock solenoid control circuit

• For turbocharged engines , code 37 will be triggered when the baro-read solenoid circuit is open or shorted.
• For normally aspirated (non turbo) engines with automatic transmissions, code 37 will be triggered when the Part Throttle Unlock (PTU) solenoid circuit is open or shorted.
• For normally aspirated cars with manual transmissions, code 37 is sometimes set for no apparent reason.

This is detected when the ECU doesn’t sense near 0vdc or 12vdc at the relay when the solenoid is turned on or off. When code 37 is thrown the power limited light will not be lit and the system will not enter limp mode.

can not find gas kill switch for 1996 dodge ram 1500

The passenger side manual door mirror fell out and I want to put it back in myself but I am wondering how it clips back in?

switch is just above trans pan and below shift linkage requires a thin (crome 1" socket) to remove

Manual 6 quarts
Automatic depends on why it's being added. If bone dry try 8 quarts and check. Always check warm in no gear, if you can't be carefullllll not to over fill. Atf +4 is what dodge automatic. take