-
Master
1,168 Answers
- Posted on Nov 16, 2010
Re: Replace water pump on suzuki sx4 2007
Hello J A prohaska.
It doesn't appear to be an easy one to do.
Here is the procedure out of the service manual.
Water Pump Removal and Installation
Removal
- Disconnect negative (-) cable at battery.
- Drain coolant.
- Remove water pump and generator drive belt.
- Remove front bumper.
- Remove exhaust manifold.
- Remove heater pipe (2) from water pump and cylinder block.
- Remove thermostat
- Remove water pump (1) from cylinder block (3)
Installation
Reverse removal procedure for installation noting the following points.
- Use new O-ring when installing.
- Install water pump assembly to cylinder block and tighten bolts to specified torque.
Tightening torque
Water pump bolt 18 ft lbs
- Refill cooling system
- Verify that there is no coolant leakage at each connection.
I hope this helps you with the repair.
Thank you for using FixYa.
KL
×