How do I open the hood of a Mitsubishi L300 ?

1. Locate the interior hood-release lever under the dashboard on the driver's side of the interior of the car.
   

2. 2

   Lift up and toward you on the hood release lever. The lever is connected to a cable that releases the hood. The hood will pop up about 1/2 inch when you pull the lever.
   

3. 3

   Move to the front of the car and locate the exterior hood-release lever under the front of the hood. It is located near the middle of the vehicle, just beyond where the front edge of the hood meets the body. Lift up on the inner lever.
   

4. 4

   Lift up on the edge of the hood while holding the inner lever in place. When the hood is up, find the hood prop and raise it, setting its tip in the hood-prop mount on the hood, to hold the hood up while you work in the engine bay.
   

Locate the hood release lever inside the car. Most cars have a lever on or near the kick panel by the driver's left foot. Some may be on the bottom of the dash panel in the same area. It is usually marked Hood or Hood Release.