Where are the spark plugs located in a 2005 dodge dakota?
To change the sparks on a 2005 4.7L Dodge Dakota you will need the following:
Note you will have to remove the air intake located at the top of the engine, and will have to move some of the coolant lines out of the way.
At the top of the engine there are 4 sparks on each side. The coils are held in place with a 10mm bolt. Undo the 10mm bolt and unclip the coil. Next pull out the coil.
Insert the socket, with extension into the spark plug hole.
Remove spark plug.
Check the gap on new spark plug, it should match stock.
tighten to approximately 25ft.lbs. (check spark-plug packaging for exact torque requirements).
repeat this process with all other sparks.
be sure that no dirt gets into the spark plug holes.
Under the coils it has a coil on plug setup 6 coils 6 plugs or 8 of each
3,729 views
Usually answered in minutes!
do i need a puller to get the coils off
How do you get the coils off to expose the plugs on a 4.7L v8 engine on a 2005 dodge dakota?
How do you change plugs on 2005 dodge dakota 4.7 v8
freeze plug pushed out trying to locate it
×