Open the back hatch of your Honda Pilot and look for two small screws. They will be right behind the tail light. Remove the two screws, using a standard screw driver. You should now be able to pull the tail light box away from the car a few inches to allow access to the sides of the tail light box Remove the two ball sockets found on both sides of the tail light box. At this point you should be able to move the entire assembly enough to get at the tail light. Inside the tail light you will find three bulb sockets. Remove all three bulbs by turning the sockets to the left.
Hope this is a help PLEASE RATE MY HELP
1,405 views
Usually answered in minutes!
×