How to reset change engine oil light after replace the oil ina ford taurus 2010

You can find the reset procedure here https://resetoillight.com/ford/oil-change-light-reset-ford-explorer-sport-trac-2008-2009-2010/

Check Engine Light 2003 Ford Focus - YouTube

? 3:17
https://www.youtube.com/watch?v=wOoDJ90aKgg
Mar 26, 2012 - Uploaded by kerobinsonii
Mom called, said her car was blowing up. Her sister told her she needed a tune up and oil change. But all is ...

Reset Engine Service Light on Ford Focus - Seven Trumpets

seventrumpet.com/how-to-reset-engine-service-light-on-ford-focus/

Mar 6, 2015 - To turn off the Engine Service Light on Ford Focus, conform to the following instructions: Turn off the ... The oil change reminder indicator will turn off. This confirms that the ... Resetting the Maintenance oil light on Acura TSX.

Question about Engine Light on Ford Focus... - Straight ...

boards.straightdope.com > ... > Main > General Questions

You can try to disconnect your battery for about 5 minutes and that will usually reset the computer.

To reset the oil life to 100%
Hit set up button through all menus to the last menu item
Hit reset button when propted to reset oil life to 100%.

If you hit the reset with out being in the menus the change is only temporary

You can find the oil life reset procedure here
https://resetoillight.com/ford/oil-change-light-reset-ford-f350-2009-2010/

This is how it works on my 2010 Escape. There are 3 buttons to the lower left of your steering column (Info, Setup, and Reset):
1) when it's displaying the "oil change required" message, hit the "reset" button to get rid of the message2) then hit the "Setup" button twice and you'll see the "oil life" screen, which is now at "0%". It tells you what to do next (i.e. "hold reset" until it say 100%).

The oil gets lighter as the engine heats up.
Was this problem there before you changed the oil? If no, thn the grade of the engine oil you have used (replace) could be of wrong specs., try using a higher grade.
Hope this helps!

In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.