When Jiffy Lube changed the oil in my 2009 Ford Expedition, they did not reset the "Change Oil" message in the instrument panel. Since I set out on a trip immediately after the service, I can't just go back in the shop to have them reset it. Is there any way I can do this reset myself??

You can leave it,it is a gadget,not tied to any system

You should have an owners manual (still) on a 2009

Never go the Jiffy Lube

Read all the damage and horror stories ,on quick change
places.

To reset the oil monitoring system to 100% after each oil change (approximately 7500 or 6 months) Perform the following:

1. Press RESET control to Display "HOLD RESET IF NEW OIL"

2. Press and hold RESET control more than 2 seconds. Oil Life is set to 100% and "OIL CHANGE SET TO 100%" is displayed.

3. ***OPTIONAL*** Once "OIL LIFE SET XXX%" is displayed, release and press the RESET control switch to change the oil life start value. Each release and press will reduce the oil start life alue by 10 percent. For example from 7500 miles to 6750 miles etc.

Note: OIl Life Start Value of 100% equals 7500 miles (12070 km) or 6 months. For example setting the Oil Life Start value to 60% sets the oil life start value to 3000 miles or 120 days.

Good Luck,

JIFFY LUBE RULES!!