SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
SOURCE: crank angle sensor location
The crank sensor is always located next to the crankshaft pulley. it will be inserted into the block with the top part of the housing half way out. you cant miss the wires leading into the tip of the housing next to the crank shaft pulley.
SOURCE: Hi, I would like to
i am not sure just what you want, to replace the sensor you remove the stering wheel and clock spring and the sensor is right there, so what do you need to know ? how to remove the stering wheel?
SOURCE: 2008 ford edge water wont drian from a/c tubing
under the truck there should be a little black tube. Using some light gauge wire, Stuff it up inside the tube and get the debris free from is, after this you will need to open the HVAC system ( I like to go through the blower motor opening, which you will need to remove the blower motor) and vacuum out the debris.
537 views
Usually answered in minutes!
×