Did not label distributor cap spark plug wires, what sequence do you reconnect the wires on the distributor? it is a 3.1L engine 1992 Isuzu Rodeo and the distributor is located in the back of the motor, would appreciate any help
Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.
969 views
Usually answered in minutes!
Noticed the same problem in the Service manual-tells you to go counterclockwise when it should be CLOCKWISE- manual had misprinted the wiring sequence, thank you problem was resolved
I didn't # the plug wires...its running rough & think I may have mixed up plug wires....2.3L 4cyl 91 amigo....does the firing order start with back passenger side & go clockwise?
smoking engine
×