Here is a picture of the torque procedure.
Bolt #11 threads must be coated with loctite 592 sealant before installation
Tighten all bolts in order to 22 Ft/Lbs.
Tighten all bolts in order to 45 Ft/Lbs
ReTighten all bolts in order to 45 Ft/Lbs
Tighten bolts 1-10 in order to 110 Ft/Lbs
Tighten bolt 11 to 100 Ft/Lbs
Tighten bolts 12-14 to 110 Ft/Lbs
Install the cylinder head and bolts. The threads of bolt No. 11 must be coated with Loctite® 592 sealant before installation. Tighten the bolts in 3 steps, using the correct sequence:
Fig. 17: Cylinder head bolt torque sequence (click over pic for zoom)
Apply sealing compound only to the cylinder head gasket. Do not allow sealing compound to enter the cylinder bore.
Install the cylinder head and bolts. The threads of bolt No. 11 must be coated with Loctite® 592 sealant before installation. Tighten the bolts in 3 steps, using the correct sequence:
Tighten all bolts to 22 ft. lbs. (30 Nm).
Tighten all bolts to 45 ft. lbs. (61 Nm).
Retighten all bolts to 45 ft. lbs. (61 Nm).
Tighten bolts 1 through 10 in sequence to 110 ft. lbs. (150 Nm).
Tighten bolt 11 to 100 ft. lbs. (136 Nm)
Tighten bolts 12 through 14 to 110 ft. lbs. (150 Nm)
Hope this helps (remember to rate and comment this answer).
553 views
Usually answered in minutes!
×