At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 3:53
https://www.youtube.com/watch?v=tF5vCjhcyd8
Jan 23, 2008 - Uploaded by richpin06a
Saturn S-series Inner Door Panel Removal. ... Power Window Repair, Window Slider Replacement: Second Generation Saturn S Series. ... Beginners How to for Installing Interior Pre-Hung Doors- Duration: 4:59. ... How To Install Replace Door Panel Jeep Grand Cherokee 99-04 1AAuto.com - Duration: ...
check the door restrictor band in the front section of the door as it probably has pulled the panel out of alignment or broken a section out (near the hinges). Re-align the door by adjusting the hinges on the body panel.
Lubricate the door latches, the sensors for 'door ajar' are located there and can get hung up-after spraying, allow it to sit for a couple of minutes, then open and close the door 6 to 12 times (each door) to free the sticking mechanism.
You need a frontend alignment. If you took off the entire tierod you may have hung the rod backwards and it is catching. When you unscrew the ends you are suppose to count the twists and then replace the ends with the same amount of twists.
If the rod is too long or too short now it will put the tires in a position that is not aligned. You can align this temporarily by straightening the wheel so the tires are parallel. Then measure the inside of the rim so that the BACK of the rims are about 3/8 of a inch wider than the BACK of the rims in the front of the tire. The tires are suppose to travel knob kneed about 3/8" toe-in.
You can adjust the door latch by aligning the male and female portion of each. This can be adjusted by loosening the screw and aligning it. And finally when aligned, tighten the screw. Unless otherwise if the door hinges are loose, such that the doors are misaligned, then, you have to replace the door hinges. Or put a bushing at the door hinges to keep it aligned. This will correct the defect.
loosen the bolts and insert a body shim, that a local body shop can in most cause give you, behind each bolt and tighten that will kick the door edge away from the body.
×