Hi, with thse symptoms, the most likely cause is a failed connection or dimmer switch, but the headlight switch is also a possibility. Your dimmer switch is integrated into the control wand. I cannot seem to find the instructions for removing the wand, but I think you remove the clamshell from the column and then unscrew the wand assembly from the column. You can test the switch by leaving the cable attached and back-probing the connector with a 12 volt test light or voltmeter. The light green wire should be hot when the headlights are turned on. Leave it on and then probe the red and purple wires. The purple wire should be hot when the switch is on low beam. The red wire should be hot when the switch is on high beams or flash position. If there is no power on the green wire, the headlight switch has failed or the green wire is disconnected or loose. Please let me know if you have any questions, and thanks for using FixYa.
The back light bulb is going. replace bulb and make sure the fuse is fine but if it is rusty, then change it
253 views
Usually answered in minutes!
they don't work on bright or dim?
×