If the brake will not release or not apply, try the following (making sure you have a fully charged battery) Disconnect battery for 10 mins ( make sure you have your radio code available- this will need to be entered after battery reconnected to use you radio) when battery reconnected follow instructions on your dash board message centre. If this fixes your problem the the fault was caused by low battery voltage. If the fault remains you have a problem with the brake module or motor. If the brake shows no fault messages but you still have a problem it could be a mechanical problem with the brake assembly which will need inspection. Hope this was of help - good luck.
2,183 views
Usually answered in minutes!
×