2002 escalade service stability system. Is there a quick fix w/o a dealer checking it out?

Read this service bulletin

http://ricksfreeautorepairadvice.com/abs-light-on-gm-vehicles/

It means that your gonna have to take it to the dealer to get it checked .is this a Cadillac product. Stability is keeping the vehicle level at all times and the light is on because the computer either has to low voltage to operate correctly or to high.it needs scanned to find out the real cause of why it came on.

Mine came on due to the steering wheel position sensor. Dealer part is about $90. Don't know how much for them to do the job.

Service Stability System light comes on when your tires are not gripping the road correctly, this assumes that the truck is sliding and the driver had no control. From what I noticed with mine is that it will disable power to the transmission untill traction is regained around 10 to 20 seconds. I had to shift to netural then back to drive to re-engage the trans. This is a saftey feature that I was impressed with. I paid about 300 to have the dearler replace the part, but I'm quite sure you can get it fixed for less.

If you think the dealer caused it get a hold of GM district rep .Talk to the service manager . If the dealer Technician's can't fix it , get the factory involved . In most cases if it is something they did they need to take care of it ,free .

Whats dose it mean went I have my service stability system light on and it dosent trun off .. I have a Cadillac escalade truck 02 All wheel drive hope some one could help me.......

Bring it in to your local GM dealer, if you want it fixed
right.

The problem is the wheel bearings that have the ABS sensor attached. Check the computer for the code as there is also an up date for the wiring sytem with a jumper for $60 fix that possible could solve the problem.

Your stability control uses the ABs wheel speed Sensors and the steering collumn sensor to know "when you need more stability". It sounds as if the front wheel speed sensor is sending bad info due to:
A) corrosion under the sensor causing erratic readings
B) front wheel bearing failing causing erratic readings
C) column sensor failing causing erratic readings

The GM dealer is the only place I know to have THOSE components tested. You can change any of these sensors yourself once you know which one it is. The "service stability" indicator is on because one of the sensors is not giving correct data, and the default mode is to disable the system. 

Good luck and hope this helps, 

Hi. this is a very important alert. the stability system on this suv is very sophisticated. there are many sensors that work together with other modules and control units to keep this SUV from rolling over during an abrupt action, due to an extreme situation.This light is warning you of a appending fault that is occurring in one or more of the sensors on board. the best solution is to take your suv to the dealership for a brisk cpu scan. This way, you can find put which sensor it is that is malfunctioning and fix it.

Please rate and god bless:)