Headlights I have a 2005 Corolla S. Low beams do not work. Bulbs are good, and High Beams, Parking lights and fog lights all work normally. Fuses under the hood good, should I replace the relay?
I have a 2003 pt cruiser the headlight won't work parking lights turn signals work I changed relays and checked fuses light bulb are goodI have a 2003 pt cruiser the headlight won't work parking lights turn signals work I changed relays and checked fuses light bulb are good
AnonymousMar 12, 2014
I have a 2003 pt cruiser the headlight won't work parking lights turn signals work I changed relays and checked fuses light bulb are goodI have a 2003 pt cruiser the headlight won't work parking lights turn signals work I changed relays and checked fuses light bulb are good
AnonymousMar 12, 2014
2003 pt cruiser lights won't work parking lights work I have changed fuses relays the bulbs are good it runs good2003 pt cruiser lights won't work parking lights work I have changed fuses relays the bulbs are good it runs good
AnonymousMar 12, 2014
Headlamps work on high beam and fogs work but normal lights won't workHeadlamps work on high beam and fogs work but normal lights won't work
AnonymousMar 13, 2014
headlights both high and low beams and fog lights outheadlights both high and low beams and fog lights out
AnonymousMar 26, 2014
I replaced the bulbs and checked the fuze why want they workI replaced the bulbs and checked the fuze why want they work
AnonymousMar 27, 2014
i have no high or low beamsi have no high or low beams
AnonymousMar 29, 2014
fuse relayfuse relay
AnonymousMar 31, 2014
How to tap into low beam for power, and tap into ign/acc for switch powerHow to tap into low beam for power, and tap into ign/acc for switch power
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
battery acid may have gone down the side and eaten-through some wiring.....happened to me once, though the car was 12+years old at the time. Took-out most of the electrical stuff in the car w/o warning....
It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)
Based on what you have described it sounds like a bad headlight switch. Since the low and high beams generally use different fuses that can be ruled out. (although checking to be sure is a good idea) Usually both high and low beams go through the headlight switch that's where I would look first.
Check the connectors that go to the headlight bulbs to see if they are burned or melted. Low beam lights are on longer than high beams. The heat buildup around the connectors normally melts them.
As you described the problem the solution is to replace the headlight bulbs, they have two elements one for normal lighting or low beam and one for high beams. the elements for the low beams are continuously used and are subject to burn sooner.
I have a 2003 pt cruiser the headlight won't work parking lights turn signals work I changed relays and checked fuses light bulb are good
I have a 2003 pt cruiser the headlight won't work parking lights turn signals work I changed relays and checked fuses light bulb are good
2003 pt cruiser lights won't work parking lights work I have changed fuses relays the bulbs are good it runs good
Headlamps work on high beam and fogs work but normal lights won't work
headlights both high and low beams and fog lights out
I replaced the bulbs and checked the fuze why want they work
i have no high or low beams
fuse relay
How to tap into low beam for power, and tap into ign/acc for switch power
×