Cars & Trucks Logo

Related Topics:

Posted on Jan 24, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

My 1987 GMC S15 with 2.8L starts will run then die like the filter is pluged but it is a new one

2 Answers

Judi Hartman

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 31, 2015
Judi Hartman
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 31, 2015
Answers
1
Questions
0
Helped
314
Points
1

You might want to replace the stator
Under throttle body. And possible a new cap and rotor

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 37 Answers
  • Posted on Jan 24, 2011
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jan 19, 2011
Answers
37
Questions
4
Helped
10477
Points
119

Check the fuel pressure this year truck known for bad fuel pumps especially after 80k

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

1987 gmc tbi starts surges and dies can hear fuil pump run and kick out could it be the fuel pressure regulator?

The pump will run when you turn on the key, however it build up to pressure and cuts off. That`s normal. If when you start the car it runs then cuts off it is more the likely the pump pressure switch that is in the pump itself. Be sure if you do this yourself to drain the gas and put on new clips for the hoses.
0helpful
1answer

Location of fuel filter on 98 GMC Jimmy 4x4 with 4.3L

The filter should be on the drivers side inside frame rail.
0helpful
1answer

GMC VAN 89 ,STARTS AND RUNS RUFF FOR 5 MIN.,SMOOTHS TO A PUR FOR 10 MIN,THEN RUFF AND DIES. SAME IF YOU TRY TO DRIVE IT. SET FOR AN HOUR BACK TO SAME WAY . PLEASE HELP....

YOU COULD HAVE RESTRICTED FUEL FILTER OR FUEL PUMP COULD BE FAILING. FUEL PRESSURE SHOULD BE 9 - 13 PSI FOR THE GAS ENGINE.IF YOU HAVE 6.2 DIESEL ENGINE YOU FUEL FILTER STOPPED UP OR YOU HAVE FAULTY LOW PRESSURE TRANSFER PUMP.YOU COULD HAVE FAULTY FUEL SOLENOID AT THE INJECTION PUMP.
0helpful
1answer

1987 NISSIAN MAXIMA WONT STAY RUNNING

  • Check the servo since the engine is fuel injected.
  • If you have questions feel free to reply to this solution.


I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482

0helpful
2answers

My 1987 chevy truck is having problems starting and running well, what do you think the problem could be?

Could be plugs, wires, cap, rotor, fuel filter, poor fuel pressure, weak coil. Basically the best thing to do is do a total tune up and see if that cures the problem, if not then we can dig deeper.
0helpful
1answer

Engine cranks but will not start

fuel filter or most likely the injectors are done
1helpful
1answer

Engine sputtered, then died. Towed home. I

Might be fuel pump, or filter is pluged up, best to chg. filter and then do a fuel pressure test.
0helpful
2answers

1988 Nissan Maxima/ Fuel Delivery

It might be the mass air flow sensor

Not finding what you are looking for?

324 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...