Not terribly specific... Jerry2bud,
Second opinion time...!!
There are PRECISE parts in your IGNITION SYSTEM
that should be looked at for "no start" condition"...
but I whole heartedly agree with JEFF ARMER...!
How much... ??
With your current mechanic
A WHOLE LOT more than it ought...
Look here...
BBB Industries...
BBB Industries Premium Alternators Starters Power Steering Products
and here
1997 PONTIAC SUNFIRE 2 2L L4 Steering Column Connector RockAuto
More Information for DORMAN 924708
More Information for ACDELCO 12092163
Replace the harness... HOG-WASH (in my opinion).
Carnac the Magnificent
Ignition switch . not wiring harness . I would try a different mechanic .
SOURCE: The key wont turn in
if its an 04 theres a button you have to push on the ignition wile you turn the key you should be able to push it with your thumb wile turning the key its meant to prevent children from acdentally starting the viehcle this likely is your problem if you have not solved it allready
SOURCE: pontiac sunfire
I had that problem last year. I bought a new starter but it was not the correct one for my car. For the 98 there are two different starters. I bought the wrong one the first time. My step father started to put it one and realized it was not the same as the one he just pulled off. Ending up taking it with us when we returned the orginial one I bought. The orginial one I bought was about $70 the correct one was $400. The auto store did not have the correct one listed as a replacement part. Until the number off of the part was keyed into the system and found out that it was just not the common replacement part.
SOURCE: 96 pontiac sunfire wont start.....
Starter solenoid , or wire that leads to it.
Also , if standard transmission , may be the switch on clutch pedal is intermitant.
Engine won't turn over unless it thinks you have your foot on the clutch.
SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
196 views
Usually answered in minutes!
×