Question about 1995 GMC Sierra C1500

Open Question

I have a 95 gmc 4x4 stick shift transmission and traansfercase. I can put it into 4 wheel drive when it is cold but after i drive it for about 20 min it will not go into 4 wheel drive untill it cools down. i have replaced the 4 wheel drive accuator on the front axle. the transfercase i working just the front axle will not engage.. please help thanks rooster

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Steven Brock

  • 507 Answers

SOURCE: 1990 GMC Sierra 4x4 1500

the connections near the front axle that activate the motor to engage the system aren't melted? That's a comon problem for that body style. If there good, sounds like it could be that motor itself. To figure out if it's you motor or transfercase, jack up the rear end, have a friend inside shift into 4 wheel drive, or try to, and put it in gear and apply some gas. If the front driveshaft is turning then it's something with the front end. If not, farther back in the system.

Posted on Sep 22, 2008

Ad

Anonymous

  • 5 Answers

SOURCE: front axle - front drive shaft Toyota tacoma 1998 4x4

more than like have a broken axle shaft, un hook the rear drive shaft and put it in 4wd if it wont move then you know you got a broken axle shaft or spider gears broke in the pumpkin

Posted on Dec 09, 2008

Anonymous

  • 318 Answers

SOURCE: 4x4 engagement front axle dodge 2500 2001 5.9 diesel

Sounds like front universal joints have worn out,,without more info,,i cannot help further

Posted on Jan 16, 2009

carfixer1989

  • 4 Answers

SOURCE: 4x4 wont engage

i would check to see if power is going to the 4 wheel drive aculator. if there is power then your aculator is bad. it is located at the front diff.

Posted on Feb 24, 2009

Anonymous

  • 3 Answers

SOURCE: 2000 gmc yukon xl 4x4 wont engage

see my posting re this at my name: rlf107. $115 in parts and labor solved for me, on a 2000 Yukon XL

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevrolet suburban LT 1500 LT won't disengage from four-wheel-drive


Chevrolet Suburban Questions - 4 wheel drive does not ...

www.cargurus.com > Questions > Chevrolet > Suburban

CarGurus4 wheel drive does not work - When I put the Sub in 4 wheel drive, low of high, ...Asked by Robert_Holland_073 Dec 17, 2009 at 04:06 AM about the 1994 Chevrolet Suburban K1500 4WD ... it can seize up and then the trans case may ingage but the hubs won't be locked in so it ... 1999 Chevrolet Suburban K2500 LT 4WD.

Chevrolet Tahoe Suburban 4 Wheel Drive Indicator Lights - Car ...

forums.edmunds.com > Chevrolet > Chevrolet Suburban

Oct 2, 2007 - 31 posts - ‎19 authors
My 1999 Tahoe (odo reading 137,400 miles) won't go into 4 wheel drive. .... I have a 98 suburban 1500 4x4 LT 5.7 L with 165,000 miles ... I recall once forgetting todisengage 4WD and I could feel a terrific binding when I ...
Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC ...? 21:32https://www.youtube.com/watch?v=Su9Dkrfd_ZgJan 20, 2014 - Uploaded by rwdellingStep by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC Truck. rwdelling .... Mine is acting like it is NOT pulling with the fronts,won't engage. ... Have you ever adjusted or the shift cable on your 1500 Chevy ... GM 246 transfer case, 2000 Chev Suburban- Duration: 20:09. by spelunkerd 286,045 views.GM Troubleshooting Part 13 - 4WD vacuum actuator & cable ...? 5:11https://www.youtube.com/watch?v=CbEF6PyJdU0Feb 3, 2011 - Uploaded by mr diyguy123I tacked on this video about the 4wd sys. ... I have a 1994 ChevyS10 ... My S10 won't let you go to 4 LO when your in gear. ... the front end to keep them disengaged. when you put it in 4wd, the vacuum actuator pushes a gear ...

Dec 25, 2015 | Chevrolet Cars & Trucks

1 Answer

My 2003 gmc envoy xl will not engage into 4 wheel drive help.


check fuses, if they check out I would look at cable/linkage that attaches shift lever to transmission. If it don't have a 4x4 shifter it's probably the switch that puts it in 4x4.

Mar 08, 2013 | Chevrolet Tahoe Cars & Trucks

1 Answer

WHAT IS THE CORRECT WAY TO GO FROM TWO WHEEL DRIVE TO 4 WHEEL DRIVE ON A 2003 GMC 2500HD


just shift to 4x4 on the fly as long as you are not going faster than 80 kms an hour.
four wheel drive low gear you will need to stop and put it in neutral, keep the brake to the floor and shift.

Dec 24, 2010 | GMC C2500 Cars & Trucks

3 Answers

How do i put my 4x4 on my 95 yukon......on park or neutral. and do i have to put my foot on the brake?


You can shift between 2Hi and 4Hi when the truck is moving. Just let off the gas and shift it. But in order to shift to Neutral or 4Lo you need to stop the truck and shift the transmission into neutral then shift the transfer case.

Dec 06, 2010 | GMC Yukon Cars & Trucks

1 Answer

Will not go into 4 wheel low


Make sure you have it in (N) before shifting it. Did it work before?

Apr 10, 2010 | 2000 GMC Sierra

3 Answers

Wont shift back from 4x4 low, to 2x2


I also have a 2002 Envoy. Shifting to and from 4wh and 4wa can be done on the fly but shifting to 4wL has to be done stoped and while in neutral. Try that. Otherwise I'm afraid its a new computer for you. Its located under the left rear seat and you need a loan for one.

Sep 05, 2009 | 2002 GMC Envoy

1 Answer

How to shift into 4wd


Ford has 2 types of 4x4 system engagement. One is a knob on the dash that you just turn to 4wheel drive high or low. The other system is the 4x4 transfer case shift on the transmission tunnel (hump) between the driver and passenger seats. To shift into 4 wheel drive high while driving, just let off the gas and shift transfer case into 4H position, and continue driving. To shift into 4 wheel drive Low, stop the vehicle completely, put transmission in neutral, shift transfer case into 4Low position, put trans. in gear, and start driving. I am assuming before doing the above, you have locked in ( turned the front hubs to 4 wheel drive position.) Any further questions, let me know.

May 16, 2009 | 2003 Ford F150 Regular Cab

1 Answer

1996 Chevy 4X4 Problem with Transfer Case & Transmission?


check vaccum actuator on front diff?use vaccum gauge should be 25 to 30lbs to open had same problem 94 gmc sierra ext cabb 4x4 5.7 ordrive tranny

Mar 12, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1995 GMC Sierra C1500 Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...