To Remove:
To Install:
Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or intermediate shaft. This damage can cause loss of steering control, which could result in personal injury.
Stabilizer shaft links at lower control arms
Pressure and return lines to the steering gear and tighten the fittings to 22 ft. lbs. (30 Nm)
Lock the steering column by installing the Steering Column Anti Rotation Pin tool J 42640 into the underside of the steering column--Aurora
Steering gear mounting bolts--Aurora
Power Rack & Pinion Steering Gear Heat Shield
Removal & Installation
To Remove:
To Install:
Figure of heat shield removed from abovmy rack and pion is leaking , how do i replace - tecnovative_122.gifocation shown
SOURCE: I have to add power steering fluid every 3 weeks
I would certainly take it back to the dealer who put in the new rack and pinion. Certainly that is where your problem lies as the fluid is going somewhere. Perhaps they did not tighten a connection and the fluid is leaking or the new unit was bad. Google Saturn and see if there was a recall on the L steering system.
1,843 views
Usually answered in minutes!
×