Your vehicle uses electronically controlled blend doors to direct th air flow from defrost to vent and to the floor . If the door motor is bad then it will stay at a fixed position so you will not get the air to flow out the defrost ducts. There are at least two of these one for air blend and one for fresh air. They are located on the passenger side usually under the plastic cover and have a wire harness that plug in and are usually shaped like a piece of pie.
NO HEAT ON FLOOR VENTS
---------
As
per your problem mentioned. There are few solved help links to
troubleshoot these problems. Go through the list and Click the link below:----
http://whatisbyme.blogspot.in/2012/05/2000-toyota-avalon-no-heat-on-passenger.html
------------
------------
http://schematicsdiagram.blogspot.in/2012/02/heater-blows-cold.html
-----------
http://repairhelpcenter.blogspot.com/2012/01/hot-air-on-drivers-side-vents-only.html
--------------
-----------
http://technoanswers.blogspot.in/2012/04/1992-toyota-camry-ac-control-light.html
--------------
http://technoanswers.blogspot.in/2012/02/no-heatblower-blows-only-cold.html
----------
-------------
http://whoisbyme.blogspot.in/2012/06/2009-mercury-grand-marquis-ac-blows.html
-----------
http://schematicsdiagram.blogspot.in/2012/04/ac-not-blowing-through-vents-on-2007.html
----------
http://schematicsdiagram.blogspot.in/2012/04/passenger-side-temperature-is-warm-air.html
----------
These
will help.
Thanks.
880 views
Usually answered in minutes!
×