Hi
Our Suzuki Samurai 4x4 Jeep has slightly loose front wheel bearings. Any assistance on the disassembly and adjustment procedure of the bearings and the disassembly requirements on the free wheeling hubs to access the forward bearing adjustment, would be appreciated.
Thanks, Mike in South Africa
SOURCE: Replacing right front wheel bearings 2003 Suzuki Aero SX
You can probably rent or borrow a bearing puller from a large parts store.
SOURCE: suzuki samurai
Look at the timing belt and make sure it is on and tight. Then maybe pull the distributor and make sure it isn't bad
SOURCE: 88 Suzuki samurai 4x4 will not engage.
The shifter sheet is worn out or not even there (its rubber) from multiple uses. It eventually decades.
Tons of Samurai enthusiast retailers carry them. Lowrangeoffroad, Petroworks, Trail Tough, and more.
They also carry the one for the tranny shifter.
1,224 views
Usually answered in minutes!
×