Question about 1997 Kia Sportage

Open Question

I have a 97 Kia Sportage 5 speed will not shift into gear when on only when off replaced the clutch cylinder and bleed ed will still not shift when I was driving it I came to a stop when I went to change into 1st it locked after my husband changed the clutch cylinder it will chg only when off pls help

Posted by on

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 275 Answers

SOURCE: Bleeding clutch slave cylinder

if you loosten the slave bleeder screw and push in the clutch pedal fluid should come out if not make sure someone holds down the pedal and tighten the screw then pump the clutch a few times and hold the pedal and open the screw if no fluid repeat a couple of times if still no fluid you need either a new master cylinder or just rebuild it( normally cheaper) and if you rebuild it make sure you flush all the lines of debris

Posted on Nov 12, 2008

Ad
motor1258

Mike Butler

  • 6674 Answers

SOURCE: too much play in my kia sportage clutch

Read this link.
http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801b07ea

Posted on Feb 28, 2009

Keith100881

Dennis Saunders

  • 74 Answers

SOURCE: put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder?

work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed

Posted on May 24, 2009

Anonymous

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

Anonymous

  • 8 Answers

SOURCE: how to adjust the clutch of a 1998 kia sportage

clutch is located at the one side of the engine just tight the screw located there do ur work along with one more person so that he can clarify that it works properly

Posted on Mar 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual 5 speed jump into gear while depressing clutch pedal


check the fluid in the clutch system (if hydraulic) (replace cable if manual). Bleed air out of system replace the clutch master cylinder.

Nov 29, 2013 | 1996 Nissan Pickup

1 Answer

Kia Sephia 5 spd won't shift gears


You need to bleed the lines with a special tool, contact the dealer on this.

Jun 13, 2012 | 2000 Kia Sephia

1 Answer

I am having a gear shifting problem with my Kia Sportage (4x4 Gasoline engine, 2009 version). taking off from an incline drive it is difficult to shift from first to second gear (grinding noise). Also...


Check your clutch fluid box located by your breaks master cylinder. Your clutch works like your breaks in that when you press the clutch pedal it uses hydraulics to disengage your clutch plate. If it's low or not working properly your clutch plate won't fully disengage and could lead to more problems.

May 27, 2011 | 2000 Kia Sportage

1 Answer

If i dont pump the clutch a few times it is very hard to shift and the pedal goes clear to the floor until i pump it a couple of times


It is likely you have drawn air into the system. Check the clutch reservoir and refill if needed. Use DOT 3 or 4 brake fluid. Bleed the system to restore clutch pedal. Check the clutch slave cylinder for leaks. If leaking, the slave cylinder will need to be replaced and the system bled again. Please let me know if you have questions.

Dec 18, 2010 | 2000 Kia Sportage

1 Answer

2003 Ford Ranger-5 Speed. At times is very hard to get into gear


Your clutch is not releasing all the way. (Assuming the problem is not internal to the transmission) Bleed the system. If that doesn't work, rebuild the clutch master cylinder and slave cylinder and bleed again.

Aug 12, 2009 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
1997 Kia Sportage Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...