At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I saw two fuse boxes, one appears to be close to battery and interior fuse box.
As far as the interior fuse box, I'd look along lower edge of dash. Sometimes the fuse is located on the end of dash, have to open door to see it.
Do you want a wiring diagram for brake lites?
Need to disconnect ground to battery before replacing light bulb or fuse will blow. Fuse is located in engine compartment next to windshield washer fluid.
Hopefully you've gotten your car fixed by now, but mine just did the same thing today 4/25/2010. While changing the dome light, I blew the 10 amp 'Batt Saver' fuse located inside the car driver side fuse area. The mini fuses in the interior are nearly impossible to check if they are blown without a tester. I bought a cheap one for $5 at AutoZone and discovered. Once replaced, all worked fine. Hope this helps someone else with the same problem I had today.
hi from uk for info the dip beams have a seperate fuse in fuse box for each side offside and nearside so if bulb is ok ? check fuses if you have h/book ? it will give location and amperage of fuse required also the same goes for the side/tail licence plate lights are on seperate fuses so you do not lose all lights if fuse goes
×