At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
code p 1494 refers to EVAP system leak detected
p1495 is EVAP solenoid /valve fault when searching for fault codes go to the browser page and type in --- fault code ( what ever code you get -- there are plenty of pages describing the fault and how to fix
Well, the code 12 is telling you the battery or the computer has been disconnected in the last 50 starts, code 21 is a problem with the O2 sensor, and code 55 is telling you there are no more trouble codes stored in memory. Code 21 means the O2 sensor is not switching from rich to lean, which can be a faulty sensor or a fuel problem.
700=TRANSMISSION CONTROL SYSTEM, NEED TO READ TRANSMISSION DTC's ON THE DRBIII(R) 732= TRANSMISSION.....POSSIBLE CAUSES----RELATED DTC'S PRESENT, TRANSMISSION SOLENOID/PRESSURE SWITCH ASSEMBLY, INTERNAL TRANSMISSION, INTERMITTENT GEAR RATIO ERRORS.. Hope this helps ??
Thats not a valid obdII code. Thats actually an error from the scanner itself not understanding the data that was sent.. I would clear the code and see if it returns. If it does find someone with the proper code scanner for a CAN system.
On your 95 Neon, the code 11 is for a problem with the crankshaft position sensor. The crankshaft position sensor mounts to the engine block behind the generator, just above the oil filter.
that is two codes, niether mean any problem, here are the difinitions, 12
Battery Disconnect
Direct Battery input to PCM disconnected within last 50 ignition key-on cycles. Normal if battery has been disconnected, otherwise check battery power and ground connections
A DTC 55 is used to end all DTC messages. This code does not show on the DRB tool and indicates a completion of the stored codes on the Malfunction Indicator Lamp (check engine lamp).
×