SOURCE: need head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in.
Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees
SOURCE: i connect a 1997 landrover discovery computer to the 1994 landrover discovery and it won't start.
if it is a mems unit , it will need to be programed to the key fob and alarm . (there is no way round it).
SOURCE: MY 2001 dISCOVERY LANDROVER AC UNIT STOP WORKING
That is a AC compressor problem.
It may be no compressor oil in that compressor
SOURCE: how to adjust rocker shaft on discovery td5
There are adjustment screws on the rockets according to RAVE.
The procedure is as follows:
1) Rotate the engine clockwise until No 1 injector lobe is at full lift.
2) Rotate rocker adjusting screw clockwise until the injector plunger is felt to bottom out.
3) Rotate rocket adjusting screw anti-clockwise one complete turn to give plunger the required bump clearance and tighten rocker arm adjusting screw locknut to 16Nm. Ensure the screw does not turn as the locknut is tightened.
4) Carry out the procedure for the remaining 4 rocker arms.
5) After completion of rocker arm adjustment slowly rotate engine clockwise 2 complete turns by hand to ensure that no injectors are bottoming out on their plungers.
SOURCE: need radio code for 1999 landrover discovery 1
Hi,
Can you confirm what brand the stereo is? If it is the Visteon brand that Landrover fit then I can help. Just let me know.
Thanks.
137 views
Usually answered in minutes!
×