Have you checked the fuses in the fuse panel under the dash drivers side.are all the signal bulbs not working front and back.do you hear the signal flasher clicking.do the hazards lights work.if the hazard lights work then you can see if all the lights work front and back,if so then it is either a fuse for the turn signals or the signal flasher.to see what the flasher looks like,with the hazards on you can locate it to see what the signal flasher looks like,as the signals have their own flasher.it is usually on the fuse panel or behind the dash.
hazards work properly...changed bulb and no clcking what so ever..tried a parts source and they dont carry it..what else can i do..will this be expensive?
its keeps shorting out...when we put a new bulb in..worksfor a few minutes then its out..can there be a shortage?
the problem you have is not bulbs,you have a signal flasher problem that needs to be replaced,as indicated in my first answer if the checks were okay.the signal flasher gets heated enough that it starts to work then quits.
×
When u press the hazards do they flash? let me know if not its the blinker relay.
no the hazards do not flash
its the flasher relay look on the fuse box or under the dash, go to parts store and ask for new one so u can see what it looks like so it will be easier to find.
okay so now the hazards are working so now u have to find the turn signal relay which gives u that clicking sound when signal is engaged , it can be square or round have parts store look it up for u so u can identify part
×
541 views
Usually answered in minutes!
the hazards work properly..there is no clicking when i try to turn the signals on..replaced the bulbs and still nothing
i have gone to a few parts place and they told me that i have to go to Chrysler directly since they dont have that part in stock..but htank you for your advise and i will definately get that checked
×