Sounds like a primary ignition problem, start at your ignition control module, if thers proper voltage to your coil (11.45 to 12.00 volts) check the primary and secondary coil resistance (refer to manual) if the coil is outside the disributor a simple spark tester will work. if no spark or resistance is not with in range replace the coil, if spark or resistance is in range proceed to check disributor cap and rotor for cracks, mositure, or corrosion. if every theing is fine there check the it could be the crank shaft sensor or ecu.
Possible distributor. most of the time spark is produced by distributor
189 views
Usually answered in minutes!
×