I need info. to do some brake work on my truck. ILooking for a blown up diagram of a rear breaking system for a1993 Ford Ranger,XL standard, four cylinder that also includes emergency [email protected]

Fuses under the bonnet

Peugeot Expert mk2 - under bonnet Fuse Ampere rating [A] Functions 1 20 Engine control unit, Fuel supply and air supply systems, Fan assembly 2 15 Horn 3 10 Front and rear wash-wipe pump 4 20 Headlamp wash pump 5 15 Fuel supply system 6 10 Power steering, Secondary brake pedal switch 7 10 Braking system (ABS/ESP) 8 20 Starter control 9 10 Main brake pedal switch 10 40 Fuel supply and air supply systems, Emission control systems 11 40 Front ventilation 12 30 Windscreen wipers 13 40 Built-in systems interface 14 30 Not used


Here's the under the bonnet fuses #3 is the one your looking to see if it's blown.
hope this helps a little.
if no diagram on the box lid or the manual go here..

http://www.autogenius.info/peugeot-expert-tp-mk2-2008-2014-fuse-box-diagram/

Your year--make--model didn't post for some reason? That info would help.
You needed to check voltage and ground for the system, before you replaced anything. I realize it takes a little longer plus you need a wiring diagram, but, it prevents needlessly replacing parts. All you need to check voltage and ground is a test-light, basically.
Do you have a high-mount brake lamp, does it work?

Do you have rusted out brake tubing or a blown
brake flex hose
Obviously & rarely do brakes go to the floor
Can't see the issue from the internet

Click on link to view vacuum diagrams.

google rear break drum

On this website you find fuse box diagram and descrition for Ford Taurus (2005)
https://www.carknowledge.info/ford-taurus-1999-2007-fuse-box-diagram/

https://www.autogenius.info/ford-taurus-1999-2007-fuse-box-diagram/

Check all fuses with a test light with key on.
This is the best way to do it on Fords.
Change all blown fuses.
Are the brake light BULBS OK?
This is the more common cause of.....no brake lights.
....and don't forget the brake light switch if all this fails.

here is a 96 taurus


Item Part Number Description 1 2C296 Anti-Lock Brake Tube 2 2C219 Anti-Lock Brake Module 3 2005 Power Brake Booster 4 2263 Front Brake Tube 5 2B091 Brake Pressure Control Valve 6 2140 Brake Master Cylinder 7 2B547 Brake Load Sensor Proportioning Valve 8 N802191-S60 Bolt 9 2L568 RH Rear Brake Tube 10 2L569 LH Rear Brake Tube 11 2C287 Brake Fluid Distributor Tube 12 N808531-S301 Bolt 13 — Front Side Member 14 N802324-S56 Bolt 15 18124 Front Shock Absorber 16 2B121 Front Disc Brake Caliper 17 2078 Front Brake Hose 18 2264 Front Brake Tube 19 2553 Rear Disc Brake Caliper 20 2A442 Rear Wheel Brake Hose 21 N808728-S60 Bolt 22 — Side Rail 23 N802324-S60 Bolt
Brake Load Sensor Proportioning Valve


Item Part Number Description 1 2B547 Brake Load Sensor Proportioning Valve 2 — Body 3 N802191-S56 Bolt (2 Req'd) 4 2L568 Brake Tube Assy 5 2L569 Brake Tube Assy 6 2265 Brake Tube Assy 7 2B255 Brake Tube Assy 8 5500 Rear Suspension Arm and Bushing 9 W611634-S301 Bolt A — Tighten to 11.4-15.6 Nm
(8-12 Lb-Ft) B — Tighten to 10-14 Nm (7-10 Lb-Ft)

Brake Hose, Rear —Drum


Item Part Number Description 1 — Rear Side Rail 2 2L569 Rear Brake Tube 3 N602324-S60 Screw 4 N611193-S60 Screw 5 2C023 Left Hand Rear Hose and Connector 6 2210 Rear Drum Brake Backing Plate 7 18125 Rear Shock Absorber 8 2267 Rear Brake Tube A — Tighten to 16-20 Nm (12-15 Lb-Ft)

if there is only power on one side of the fuse it is blown insert another fuse anyways then goto the brake light switch and see if you have power on one side if you do, then press on the brake pedal if power doesn't show on the other side when you press it then you have a bad brake light switch.

If there is no fuse that is blown, then according to wiring diagrams on autozone.com repair info link it must be the combination switch: http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/8d/31//large/0900c152800a8d31.gif

My mother's brake lights (1996 Ford Contour) were not working and it was the combination switch. The combination switch is an assembly by the wheel, you use it to give turn signals, high beam, hazard lights and apparently the 'smart' Ford designers linked the rear brake lights to it. Could be a contact that is oxidized. I repaired mine. I may have one lying around. You can get this from a junk yard. I believe it is pretty simple to remove.