Question about Ford Ranger
If it's not a coin, look inside the buckle again, compare it with a properly working latch. If you see something inside the broken latch that looks like it may be protruding out from the back, try pushing it back with a flathead or key, then pop the push button back up with the same tool you used... I have to do this each time I get out of my truck because the spring is broken. It still should work fine, it's just missing a spring that reset the latch to it's resting position. If you're still skeptical about it though, it's like a 25 dollar fix with installation.
Posted on Sep 04, 2009
If it is broken you do not have to remove the seat to replace as I was
instructed. I welded a 20 inch x 1/2 inch length of flat steal to a 10 mm open end wrench. it is slow but still faster then removing the seat, I have power seats. the only thing i would of done differently would be to use a ratcheting wrench instead of open end.
Posted on Apr 17, 2010
I took a 2005 Ford Taurus in with the same issue. Woudn't buckle. They looked inside it for a coin or something, found nothing, then tried forcing it and still nothing. Quoted me a OEM buckle for $275, for a buckle. Then $80 to install. I got the part number, purchased off eBay used, installed with a wrench in 20 min. New on line run about half the cost of dealership. The new OEM cost is associated to a wire that is connected to a sensor which deploys the airbag. It isnt front car impact sensors (that most of us think), it's the force your body pulls on the belt at impact. You can buy buckles new too without the wiring for $30. I figured for $39 a used one would be fine, just hope the wiring is working on it or I may end up dead trying to save $200+ clams. The wiring connection simply plugs into the lower device at time of install.
Posted on Sep 14, 2011
Go to Walmart or Auto zone and buy a can
Of w-40 or mr.werench and put a rag under it and spray it and try reinsert it
Now if you do that and if that don't work you mite go to the junk yard and just buy a male receive seat belt side it is cheap and easy to take off and reinstall good luck
Posted on Jun 06, 2019
Latchg may have injested a coin, trying to figure this one out myself.
Posted on Sep 07, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 02, 2016 | Seat Cars & Trucks
Apr 29, 2016 | 2008 Ford Escape
Aug 28, 2017 | Seat Cars & Trucks
Nov 23, 2014 | Seat Cars & Trucks
Nov 08, 2013 | 2002 Nissan Xterra
Oct 20, 2013 | Chevrolet Silverado 1500 Cars & Trucks
Aug 06, 2012 | 2004 Mercury Grand Marquis
Apr 02, 2011 | 2001 Toyota Highlander
Mar 06, 2009 | 2003 Dodge Neon
Jan 09, 2009 | 1999 Ford Explorer
27,412 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: