Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Apr 01, 2011

My denali will only click when i try to start it. what could it be?

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 1,702 Answers
  • Posted on Apr 01, 2011
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Nov 11, 2010
Answers
1702
Questions
0
Helped
767433
Points
5420

Most likely you have a low battery, try to jump start the truck, you may have to leave the jumper cables hooked up for a wile before trying to start the engine, if after the battery is charged the truck still just clicks, try cleaning the battery terminals, if still no luck you will need to remove the starter and have it tested and repaid.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 2003 Denali won't start I turn the key and just get a fast clicking noise good battery new starter and all power works

Where's the clicking noise coming from ? Under the dash , under the hood in the engine compartment ? Do starter circuit voltage drop test ! When the key is in start position is there constant B+ voltage at the 10 amp crank fuse in the under hood fuse box ? This is an input to the PCM - engine computer to energize the starter relay ! Starter Voltage Drop The battery is good , starter is new ,what about the cables ? watch this video on testing starter circuit !
0helpful
2answers

2004 Denali-wont start

sounds alot like a bad battery
0helpful
2answers

I have a gmc Yukon denali. It wouldn't start and

Sometimes new starters have to be shimmed so that the gear on the starter lines up with the gear teeth on the flywheel on the motor. The grinding noise is the reason I say that is what's wrong. If there were shims already there, try taking them out. I hope this helps you
1helpful
1answer

My 2003 Yukon Denali has an intermittent problem with the passenger door window. It sometimes will not operate with either control. I can hear electrical clicking when either switch is activated. ...

the door window motor might be weak or has stoped working. my 2003 pass window motor went also, all others work fine still but the drivers is starting to get weak now, i tried to lube the cable and sliders but that did nothing. Replaced pass with a $60.00 used and its great.
0helpful
1answer

I have a 03 GMC Denali, How do I replace the heater actuator,(air only comes out defroster and it makes a clicking noise when I first start it up)

the mode door actuator is under the drivers side foot area on the left side of the heater box. it has two 7/16 screws and one connector
0helpful
1answer

2000 yukon denali will not start

I had problems with my remote button, with battery fully charged turn on key for ten second, turn key off un-hook positve side of battery, re conect turn key to on postion then try to start, it worked for me I have a 2003 denali yukon XL, the motor would fire then stop.
2helpful
2answers
1helpful
1answer

I have a 2002 Yukon Denali. The other day I went

check for loose battery connection. or maybe a cable going bad. they can corrode inside and the copper wire will turn green
Not finding what you are looking for?

229 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...