Belt diagram for a 07 caliber 2.0 - Caliber Dodge Cars & Trucks

SOURCE: belt routing diagram for 2007 caliber w/ 2.4

If you register here: http://www.caliberforumz.com you can download a free copy of the repair manual for your car in the "General discussion" forum. That manual will have the diagram you are looking for.

Colin Stickland

• 22516 Answers
• Posted on Mar 08, 2010

SOURCE: I need to know the wiring diagram for 07 dodge

i doubt if you will get one ,these newer vehicles use encrypted software and modules so they do not use wires as such ,only 5 cables -two bus lines a perm 12v feed a earth and a 12v ignition switched feed .sorry--- again dealer only

SOURCE: 07 caliber.cranks and idles. won't come out of

First try this.turn the key to on position in ignition and then press the brake pedal and see if brake lights coming ON,.If the brake light is not coming on then problem is faulty brake light switch.A very common problem for Dodge on this issue is the Brake Light Switch. It has three internal switches controlling various functions of the vehicle. It's main function is to control operation of the vehicle's brake lamps. Other functions include speed control deactivation, brake sense for the antilock brake system and brake sense for the brake transmission shift interlock. This switch is located at the top of the brake pedal arm, under the driver's side dash.

Replace the switch.------------ But if brake light is coming On, then check the fuse.--------- check fuse #14 in the fuse box under the hood and to the left side of the engine compartment. If it is blown replace it and see if the car will now shift out of park.
---------- To see the brake light switch location diagram for your car.click the link below:--- http://technoanswers.blogspot.com/2011/07/where-is-brake-light-switch-located-on.html ------------ This will help.Thanks.Helpmech.