Nissan Altima 1995 Brake Light swith staying on

disconnect your brake light switch ,its in brake pedal once you disconnect ,brake light off,either swicht or grounded to other wire

there is a pressure switch under ur break pedal.it might come off happend on my altima i snapped in a penny and it solved it.switch needs to be pressed in inorder to turn the brake light off.good luck..

you probably have a bad switch, as it should disconnect the circuit when you depress the plunger-it does happen.

Lets keep it simple if the wiring harness is in good condition lets not look at that... first check your fuse if the fuse is good... check for power... if you have power coming and going from the fuse then check your brake switch ( located under the dash) attached to brake pedal. Please make sure your light bulbs are both good also. If your brake light switch is good and you have tried everything else it is either going to be in your 4 way switch or wiring harness

there is a plastic plug that push the brake swith and they usually brake after many years , check that , and also check all the light bolbs

Replace the brake light switch. It will fix both problems.

what that means is your socket is is probably shorted to your running lights there is a constant feed of voltage to that circuit. i would take a circuit probe and trace a wire to the spot of the short. good luck.

is there power TO the brake light switch? adn is there power OUT OF THE BRAKE LIGHT SWITCH?

sounds like you got a faulty switch... even though it's new, take it back and try again. Sounds like the switch is stuck in the closed position. Disconnect the switch and make sure that makes the lights go out.

like other people are saying the switch is fine and the brake light still stay on, wat can i do to fix it???