2000 Pontiac Bonneville Logo

Related Topics:

Posted on May 08, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

What tools do i need to take off a mass air flow sensor on a 2000 pontiac bonneville sle?

2 Answers

Jeffrey Turcotte

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Pontiac Master 8,991 Answers
  • Posted on May 08, 2011
Jeffrey Turcotte
Pontiac Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Aug 22, 2010
Answers
8991
Questions
7
Helped
4372457
Points
33683

A screwdriver should do it. It's sitting on top of the throttle body as shown below.

what tools do i need - jturcotte_1662.gif

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Expert 252 Answers
  • Posted on May 08, 2011
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: May 05, 2011
Answers
252
Questions
0
Helped
82540
Points
838

No more than a couple screw drivers and 15 minutes of your time


if it helps thumbs up would be nice

Ad

1 Related Answer

Anonymous

  • 395 Answers
  • Posted on May 15, 2010

SOURCE: where is the mass air flow sensor on 2000 pontiac

mass air flow sensor is located on the air hose that leads to the air filter if you have the part just look for the same look to make sure.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

P0102 2001 pontiac bonneville

Hi there:
DTC P0102 is a fairly straight forward code pointing to a fault in the Mass Air Flow Sensor. I suggest check to make sure there are no holes or air leaks in the air filter housing or ducts.


Also, check that the air filter element is not excessively dirty and restricting air flow; at this point, if the visual inspection is ok, suspect a faulty Mass Air Flow sensor.


Check in THIS LINK information about description and additional tests.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.


Thank you for using FixYa, have a nice day.
0helpful
1answer
0helpful
1answer

I have a 1994 bonneville i have fuel and fire ignition module is good i pulled the 1 and 4 to test the cps and i got fire any sugestions

Take the handle of a screwdriver and tap on the mass air flow sensor while someone else tries to start it.If it starts then take the mass air flow sensor off and clean the small thin wires with a non-chlronated brake cleaner and let dry for 10 minutes and re-install.
0helpful
1answer

I have a 1993 pontiac bonneville that goes really slow between 20 to 40mph and i have cleaned the mass air flow sensor and the problem persists. The service engine light comes off and on, and the security...

have vechicle code scan, faulty mass air flow sensor will cause engine run poorly stall out.sound like transmission could be slipping not going in over drive if vechicle cant go over 40 miles an hour.change transmission fluid and filter see it helps. mass air flow sensor has to be replaced most people try clean them but best to replace them.
0helpful
1answer

I have a 2000 pontiac Bonneville sle and it was running fine it stalled yesterday on me n after a bit started back up and ran fine the rest of the night, This morning It started fine and then 15 mins...

I had the same problem with my 2000 Bonneville SLE and I replaced the crank shaft sensor and it solved the problem. The crank shaft sensor is located behind the harmonic balancer. You have to take the balancer off to get to the part. You will need a puller to get it off. You will also have to take the fly wheel cover off and hold the fly wheel when you remove the nut from the front of balancer.
3helpful
1answer

Where is the mass air flow sensor on 2000 pontiac bonneville 3800 sle

mass air flow sensor is located on the air hose that leads to the air filter if you have the part just look for the same look to make sure.
0helpful
1answer

Where is the mass air flow sensor 1999 bonniville?

It is in the air intake between the filter and the intake manifold.
3helpful
2answers

Location of mass air flow sensor, 2000 Grand Prix GTP

Hi:
The mass air flow sensor is a round sensor that is mounted in the air intake, between the air cleaner box and the engine throttle body.
Not finding what you are looking for?

344 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...