Question about 2011 Dodge Journey

1 Answer

I installed the wiring harness for the tow package and there is no current to the plug. Do I need to put a fuse in? If so, I have checked the fuse box diagrams and they do not match what I have in the vehicle. What fuse(s) do I need and what slots to they go in. I have F and K labeled slots. My owners manual is using M and J slots and does not match the pattern in the vehicle.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Dodge Master
  • 5,918 Answers

Fusebox layouts do tend to change from territory to territory though mostly the vehicle handbook diagrams are fairly accurate. It is the diagrams in the repair manuals that tend to be generic.

Sometimes it is necessary to fit fuses to vacant slots and hope for the best...
Usually nothing bad happens...

Posted on Aug 31, 2017


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 1 Answer

SOURCE: fuse panel

need layout of fuse panel for 1994 dodge caravan

Posted on Jan 23, 2009


  • 50 Answers

SOURCE: need wire diagram to hook up trailer lights, truck not factory equipped w/harness,

I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.

Posted on Apr 12, 2009


  • 580 Answers

SOURCE: trailer wiring harness diagrams W/o internet goose chase

Try this Link

Posted on Jul 10, 2009


  • 3 Answers

SOURCE: Fuse Panel Diagram

email me and i will email you a copy of mine
subject dodge manual ok

Posted on Sep 17, 2009


  • 43 Answers

SOURCE: need fuse diagrams for a 1997 dodger avenger

Here is the one from the inside. It is in the correct orientation as well.

Posted on Dec 19, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a new 2010 jeep cherokee and purchased a Mopar 7-way tow harness. I am currently in the process of doing the wiring installation, but the instructions are NOT clear as to 'what' gets...

if you have the dealer tow connector then it easy to do, theres no cut of wires you just connnect to connectors,if you look under the rear of the jeep you will see the connectors, they are pre wiring and taped or zip tied up, on this year if you dont see them under the rear then look inside the rear behind panels. heres a good website with videos to help you, all you do is type in the year make and model, there are two types, if your truck has the tow package then theres a wiring for that with two plugs if it didnt come with a tow package then it comes with four connector plugs,the web site is

Aug 21, 2011 | 2010 Jeep Grand Cherokee

1 Answer

Looking to put a hitch on my ram 1500(2001). Is the wiring harness the same as if i had a tow package on it?

the wiring harness is the econimical way to go about it; it serves the same function as if you had a tow package. But if you want the Dealer Tow package look, there are multible harnesses that you can just plug into the existing plug under your vehicle

Dec 15, 2010 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

No current to turn signal socket even after replacing flasher and fuse also new bulb and checked bulb socket for continuity. all good .no current on white and green wire coming from fuse box where flasher...

If you have the tow package wiring in the truck, check the wires around or behind the battery. The tow package harness is feed thru here and each wire has a fuable link that can go bad. Check for power on either side of the bulge in thw wire (this is the fuable link). If you find that this is the problem, you can cut out the fusable link and splice in an aftermarket in line fuse holder to maintain protection against shorts.

May 26, 2010 | 2006 Ford F-250 Super Duty

1 Answer

I have a tow package on my 04 durango but can't find the harness

Someone may have installed the hitch aftermarket but opted not to install the wiring harness. You might need to get a new harness.

May 20, 2010 | 2004 Dodge Durango

1 Answer

No power to tow wiring harness

hello, if the vehicle came with factory towing, i has the relay already....sometimes they ship however without the fuse. the fuse should be behind knee panel on driver's side labed TOW or TRAILER good luck, marty

May 27, 2009 | 2008 Mercury Mariner

1 Answer

Trying to find the wiring for a tow pckg in a 2000 montana

the harness is there you need the plug that goes from the factory plug to the kind of plug you need for your trailer. the harness is wrapped around the wires for the rear tail lamps

Apr 09, 2009 | 2001 Pontiac Montana

2 Answers

My chevy z71 96 running lights work, but not right brake/blinker

check for a short it could be anywhere in the line

Feb 14, 2009 | 1996 Chevrolet K1500

1 Answer

No brake lights ,fuse is good,brake switch checks good. 1998 chev

Have you Checked the Harness under the Rear of the Bed for the Tow Package? These Truck usually have the Plug Harness installed from Factory and can sometimes come Undone.

Dec 31, 2008 | 2001 Chevrolet Silverado 1500

1 Answer

Existing wire harness for trailer plug does not work

Checked all fuses under hood for towing package etc. May not even be one in there yet if you've never used it before. Checked owners manual?

Oct 18, 2008 | 2005 Mazda Tribute

6 Answers

Trailer wiring for 2005 Ford Escape without factory tow package

I had the sam problem with my '02 escape when I installed the hitch. I changed the turn signal relay under the dashboard on the drivers side of the dash with one from an escape that had a tow package(one was blue and the other was yellow...). worked fine for me after that. Don't know if it changed later...

Oct 17, 2008 | 2005 Ford Escape

Not finding what you are looking for?
2011 Dodge Journey Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides